biller.ca
Free tool

Free gravel calculator.

Enter your sizes in any units, and see tonnes, cubic yards and an estimated cost, with a density you can change. No account needed.

Updated

The short answer

Volume = length × width × depth. Weight = volume × density. A 20 by 10 ft area, 4 in deep, with 10% extra is about 2.08 m³.

At 1.632 tonnes per cubic metre, that is about 3.39 tonnes. Density changes by product, so use your supplier's figure when you have it. You can edit the default.

Work out your gravel

No account needed

An estimate. Runs in your browser. Nothing you type is sent anywhere.

Units

The buttons change every measure. To mix units, pick a unit beside any one measure.

Long side

Short side

How deep, once spread

An example value. Change it to suit the job.

A default you can change. Ask your supplier for theirs.

From your supplier's quote, before tax. Optional.

Gravel needed
3.39 t
In short tons
3.74 short tons
In cubic metres
2.08 m³
In cubic yards
2.72 cu yd
Estimated cost, from your unit price, before tax
—

Enter your supplier's price to see an estimated cost.

Confirm quantities with your supplier before you order.

Got the tonnage? Put a price on the job.

Biller emails a quote link with a valid-until date. The client accepts or declines on the page, and an accepted quote goes on your schedule as a job, ready to bill when the work is done.

Start free

Free plan with unlimited invoices. No credit card.

How the calculator works

  1. Every size becomes metres, so you can mix feet and inches.
  2. Volume = length × width × depth. For a circle, volume = π × (diameter ÷ 2)² × depth.
  3. The waste allowance is added to the volume.
  4. Weight = volume × density.
  5. Estimated cost = your unit price × the quantity in that unit.

The assumptions

AssumptionDefaultWhere it comes from
Density1.632 t/m³, which you can changeThe conversion factor in Alberta Transportation specification 3.2. It is a road contract factor, not a test of your gravel
Waste allowance10%, which you can changeAn example value, not a rule
Unit priceBlankYou enter it. We show no prices, because they change by supplier and region

Real density changes with the stone, its size, the moisture and how tightly it packs. If your supplier sells by the yard or gives a conversion, use that.

Worked example: a parking pad

  1. Area: 20 × 10 ft = 200 sq ft.
  2. Volume: 200 × 0.333 ft = 66.67 cu ft = 1.89 m³.
  3. With 10% extra: 2.08 m³.
  4. Weight: 2.08 × 1.632 = 3.39 tonnes.

Before you order

This page gives an estimate only. Confirm quantities with your supplier before you order.

Ask about delivery, minimum loads and access. To price the job, use the markup calculator. To send it, use the bid template.

Questions

How much gravel do I need?

Multiply length by width by depth to get the volume, then multiply by the density to get the weight. At 1.632 tonnes per cubic metre, a 2 m³ driveway layer weighs about 3.26 tonnes.

How many tonnes are in a cubic metre of gravel?

It depends on the material, the moisture and how it is packed. The calculator starts at 1.632 tonnes per cubic metre, a figure from an Alberta road specification. Ask your supplier for the figure for the product you buy.

Is a tonne the same as a ton?

No. A tonne is 1,000 kg. A short ton is 2,000 lb, or about 907 kg. The calculator shows both, so you can match your supplier's quote.

How deep should gravel be?

It depends on the job, the base and the traffic. The calculator works out a quantity from the depth you enter. Ask your supplier what suits the job.

Why allow extra?

Gravel settles and spreads, and a short load costs another delivery. The calculator starts at 10% as an example value. Change it to suit the job.

Stop pricing jobs on the back of a receipt.

Biller takes you from quote to schedule to invoice, with e-Transfer and card payments and reminders for late payers. Free to start, Pro is $99 a year.

Start free — no credit card

Free plan · Pro $99/year · Built for Canada — e-Transfer and card payments

Not ready? Try the free bid template

About this information

This page is general information, not financial, legal, or tax advice. We gathered it from public sources (banks, payment providers, government agencies such as the CRA, and published industry rates), and it reflects our understanding when it was last updated. Rates, limits, fees, and rules change without notice, and your situation may differ from the general case.

Before you rely on anything here, do your own due diligence: confirm the details with the original source, and check that they are still current. For advice about your own finances, taxes, or legal position, hire a qualified professional such as an accountant, lawyer, or financial advisor. See our Terms for the full disclaimer. Last updated October 31, 2026.